UAE and GCC supply. Every item is quoted.Call +971 50 496 8972sales@vmv-solutions.com

Guide

Carton ply and burst strength: how to specify corrugated cartons

How to read carton strength terms and write a carton specification that a supplier can quote and a warehouse can use.

Buyers ask for “strong cartons” and get quotes that cannot be compared. Strength is described by plies, flutes, a burst figure and an edge crush figure, and each one answers a different question. This guide shows how to specify them.

Wall construction: single, double, triple

Corrugated board is made of flat paper liners with a fluted layer in between. Single wall has one fluted layer between two liners, often sold as 3-ply. Double wall has two fluted layers and three liners, so 5-ply. Triple wall has three fluted layers and is used for heavy loads. The catalogue lists a 5-ply corrugated carton in 600 x 400 x 400 mm.

Mullen burst strength

The Mullen test measures the force needed to rupture the face of the board and is reported in pounds, for example 200#. It is a long-standing measure and relates indirectly to how a carton resists forces during shipping. A Crown Packaging white paper gives approximate equivalences of about 125# to 350# for single wall and about 275# to 600# for double wall.

Edge crush test (ECT)

The edge crush test measures the compressive strength of a board edge and is reported in pounds per inch, for example 32 ECT. The same source describes it as directly related to stacking strength, which is why palletised cartons are often specified by ECT. Approximate ranges quoted are ECT 23 to 55 for single wall and ECT 48 to 82 for double wall.

Which one to use depends on the risk:

  • Cartons that are stacked high on pallets: specify ECT.
  • Cartons that are thrown, dropped or punctured: burst strength is still widely requested, and weight limits are useful.
  • Export cartons: mention stacking height and transit time in the RFQ, and let the supplier propose the board.

Flutes

Five flute types are named in the source, A, B, C, E and F. They differ in height and spacing, which influences cushioning, stacking and print surface. If you only know the product and its weight, say so, and ask for a proposal.

Size, style and closure

Specify internal length x width x height in millimetres and state whether the dimension is internal or external. Say whether the carton is a regular slotted carton, a die-cut style or a telescopic box. Mention how the carton will be closed, by tape, strapping or stretch wrapping, because the old catalogue lists BOPP tape, PET strapping and stretch film alongside cartons.

Custom printed boxes are listed on the old site. Send artwork, number of colours and the print area, and say whether the print is for retail display or only for handling marks.

A worked example

A packer ships 12 kg of glassware in cartons stacked six high on a pallet. A full pallet loads the bottom carton with the weight of five cartons above it, which is 60 kg, and the board must carry that for the whole journey. That is a stacking question, so an edge crush figure fits the job better than burst alone. The numbers are made up for the example, and the supplier should propose the board once it knows the weight, the height of the stack and the time in transit.

Common mistakes in carton orders

  • Specifying burst only for a stacked load.
  • Choosing 3-ply to save cost for a heavy product.
  • Forgetting humidity. Board loses strength when damp, which matters in coastal storage.
  • Using the same carton for all products.
  • Skipping a drop or stack trial before a large order.

Questions to ask any supplier

  • What are the burst and edge crush figures of the offered board?
  • Which flute and board thickness are offered?
  • Is the carton delivered flat or made up?
  • What is the minimum order for printed cartons?
  • Is a sample available?

What to put in the RFQ

  • Carton size (internal), style and number of plies
  • Burst and edge crush figures if your packing specification gives them
  • Weight of the packed product and stacking height
  • Print requirements and artwork
  • Closure method: tape, strap, wrap
  • Quantity per size and delivery site
  • Delivery date and any staged delivery

Use the carton boxes page to start a request, and the bulk order checklist if cartons ship with other goods.

What this guide does not do

It does not state that any carton we quote reaches a burst or crush figure. Ask for the board specification of the exact carton offered.

Ready to quote?

Send the item, specification, quantity and delivery location. Open the quote form with this topic filled in, or email sales@vmv-solutions.com.

Frequently asked questions

What does 5-ply mean?

Five layers: three flat liners and two fluted layers, which makes a double wall board. A 3-ply carton is single wall, with one fluted layer between two liners.

Is burst strength the best measure?

It is the traditional one. Edge crush test is described as more directly related to stacking strength, so name both if stacking matters.

What do A, B, C, E and F flutes mean?

They are flute profiles. Ask your supplier for the profile and board thickness if protection or print quality matters.

Do you supply printed cartons?

The old site lists custom printed boxes. Send artwork, size and quantity and the quotation states what is possible.

Can I order a carton by internal size?

Yes. State length, width and height, and say whether the size is internal or external.

Sources

Crown Packaging: Mullen vs ECT

Related pages