UAE and GCC supply. Every item is quoted.Call +971 50 496 8972sales@vmv-solutions.com

Guide

Plywood grades and uses: dry, humid, exterior and marine

Plywood is sold by thickness, face and glue type. Knowing what each class means keeps fit-out orders from arriving in the wrong grade.

Plywood orders for fit-out joinery, hoardings, shuttering or packing cases fail when the grade is described loosely. “Marine ply” can mean a standard-based board or a name used for any water-resistant sheet. This guide separates the terms that matter.

Bond quality and service class

Two European standards define most of the vocabulary used in specifications.

  • EN 314-2 rates bond quality for three conditions: Class 1 for dry interior use, Class 2 for humid or protected external use, and Class 3 for sustained weather exposure or continuous high humidity.
  • EN 636 sets service classes that combine bond quality with the durability of the timber species. Class 1 is dry, Class 2 is humid and Class 3 is exterior.

A retailer summary links these to glue types: urea formaldehyde for dry conditions, melamine urea formaldehyde for humid conditions and phenol formaldehyde for exterior use. Standards are revised, so state the edition your project uses.

Old terms you will still see

WBP (weather and boil proof) and MR (moisture resistant) are older labels. In the Elliotts summary, WBP or exterior grade corresponds to bond Class 3 and MR to Class 2. If a specification still uses these words, ask the consultant which bond class is meant.

Marine plywood

Marine plywood is bonded with phenol formaldehyde to the exterior bond class. BS 1088 is the British Standard that specifies requirements for marine plywood, in two classes. Durability of the species, construction and tolerances are where marine boards differ from other exterior plywood. If your project names BS 1088, write it in the RFQ, with the thickness and sheet size.

Face veneer and finish

Plywood faces are graded for appearance. Fit-out joinery usually wants a clean face, while formwork and packing accept a rougher one. Describe the face you need, for example “sanded, one good face”, not only the grade letter. Film faced plywood is a separate product, so ask for it by name and give the thickness, sheet size and the film type your formwork design names.

MDF and other boards

MDF is a fibre board made from wood fibres, resin and wax under heat and pressure, and the catalogue lists MDF and moisture-resistant MDF in 18 mm. Moisture-resistant MDF is chosen for kitchens and humid rooms. MDF suits painted joinery. It is not a substitute for plywood in structural or outdoor use. White wood sawn timber is also listed in the catalogue by cross-section and length.

Sealing and storage

Sealing all faces and edges before exposure to moisture is standard advice for plywood and especially for exterior work. Store sheets flat, off the ground and covered, and say if your site has limited storage, since delivery in stages may suit.

Choosing by use

  • Dry interior joinery and furniture: an interior class is usually enough. Moisture-resistant MDF is another option for painted work in humid rooms.
  • Hoardings and temporary works: an exterior bond class matters, since sheets sit in weather for months.
  • Formwork: ask for film faced plywood by name and give the pour count your design expects.
  • Boat, dock or splash zone work: marine plywood to the standard your specification names, with sealed edges.
  • Packing cases: lighter grades may be enough, so ask what the case must carry.

Common mistakes in board orders

  • Ordering by thickness alone.
  • Using interior boards outdoors because the thickness is right.
  • Not sealing cut edges on exterior work.
  • Ignoring the sheet size, which decides how many sheets a job needs.
  • Assuming that two boards sold as “marine” are the same product.

Questions to ask any supplier

  • Which bond class or standard does the datasheet cite?
  • What species and face veneer are offered?
  • Is the thickness tolerance stated?
  • How are sheets packed and delivered?
  • Is a sample sheet available?

What to put in the RFQ

  • Type: interior, exterior, marine, film faced, MDF or MR MDF
  • Standard or class if your specification names one, such as EN 636 service class 3 or BS 1088
  • Thickness and sheet size, and quantity per size
  • Face grade and finish
  • Delivery site and date, with any staged delivery
  • Brand or “equivalent”

Start the request on the plywood and MDF page.

What this guide does not do

It does not say that any board we quote meets a standard. Ask for the datasheet and bond class for the exact board offered.

Ready to quote?

Send the item, specification, quantity and delivery location. Open the quote form with this topic filled in, or email sales@vmv-solutions.com.

Frequently asked questions

What is the difference between interior and exterior plywood?

Mostly the glue and the species. Interior grades use glues that do not tolerate sustained moisture, while exterior grades use phenolic glue that suits sustained weather exposure.

Is marine plywood waterproof?

It is made for wet conditions, but it should still be sealed, and edges sealed for exterior use. Suppliers and standards describe its construction and durability, not that it cannot be damaged by water.

What does WBP mean?

Weather and boil proof, an older term for exterior glue. Specifications now refer to bond classes and service classes.

What thicknesses should I list?

Give each thickness and the number of sheets, plus the sheet size. For MDF the catalogue lists board sizes in a spec field, so name the thickness you want.

Do you state that your plywood meets a standard?

No. Name the standard or grade in your request and the quotation states what can be supplied against it.

Sources

Elliotts: plywood classes explained | BSI Knowledge: plywood specifications | SAI Global: BS 1088 marine plywood

Related pages