UAE and GCC supply. Every item is quoted.Call +971 50 496 8972sales@vmv-solutions.com

Products

Cable Trays and Cable Management in Dubai: What to Specify

VMV Solutions LLC quotes cable management for buyers in Dubai and the UAE. Here is how to specify cable trays, and which cable accessories are already listed.

Cable tray orders are specified by the shape and size of the tray, the material and finish, the load to be carried and the fittings that link runs together. VMV Solutions LLC lists cable management and cable accessories in its catalogue and quotes cable trays on request when you send the specification. Cable trays are not displayed as catalogue products, so this page explains how to describe them.

What is listed today

  • Cable management: 20 mm heavy-wall PVC conduit
  • Cable accessories: cable glands in sizes PG7 to PG42, cable ties from 100 mm to 300 mm, cord pin lugs of several types, selector handles and shafts

See the cable management category and cable accessories. The old site has guides on PVC conduit and cable glands.

Mistakes that slow a cable tray order

  • Giving width only. Depth, thickness and finish change both fit and load capacity.
  • Ordering straight lengths with no bends, tees or risers.
  • Forgetting covers, brackets and hangers.
  • Choosing the same finish for indoor and coastal areas.
  • Leaving out the load. Load per metre and support spacing come from the design.

A sample request

“Quote 400 m of perforated cable tray, 300 mm wide x 50 mm deep, 2 mm thick, hot-dip galvanised; 20 horizontal bends, 12 tees, 10 reducers; 100 cantilever brackets; covers for the first 200 m; load and support spacing per the attached design; delivery to a warehouse in Al Quoz.” The reply can then state which lines can be supplied.

How to specify a cable tray

  • Type: perforated, ladder, wire mesh or solid-bottom
  • Width and depth in millimetres, and length per section
  • Material: galvanised steel, stainless steel, aluminium or plastic
  • Finish: pre-galvanised, hot-dip galvanised or painted, and steel thickness
  • Load per metre and support spacing, from your design
  • Environment: indoor, outdoor, coastal or corrosive
  • Fittings: bends, tees, reducers, risers and covers
  • Fixings: brackets, hangers, bolts and earthing links

Trunking, conduit and glands

Cable tray is one of several routes. Trunking and conduit protect small runs, and glands finish cable entries into enclosures. For each, give size, material and quantity. For glands, give the cable outer diameter range, since a PG size covers a specific diameter band.

Where it is used

  • Commercial towers and malls: risers and ceiling voids
  • Warehouses and industrial plants: long runs with higher loads
  • Data and plant rooms: dense cable routes
  • Outdoor and coastal sites: finishes chosen for corrosion

Documents to ask for

Ask for a datasheet that shows load capacity, material and finish for the exact tray offered, and the drawing or schedule your design uses. If your project requires a standard, write its number in the request.

How the quotation works

Send the specification or drawing through the form, attach a BOQ if you have one, or call +971 50 496 8972. The reply states what can be supplied and lists any item that cannot be. Prices are not shown online and delivery timing is stated in the quotation.

Add circuit breakers and other electrical supplies to the same list.

Ready to quote?

Send the item, specification, quantity and delivery location. Open the quote form with this topic filled in, or email sales@vmv-solutions.com.

Frequently asked questions

Do you list cable trays in the catalogue?

Cable trays are not listed as catalogue items. Send the specification and the reply states what can be supplied.

Which cable management items are listed?

A 20 mm heavy-wall PVC conduit, cable glands from PG7 to PG42, cable ties from 100 mm to 300 mm, and cord pin lugs.

What should I give for a cable tray?

Type, width, depth, length, material and finish, thickness, the load it must carry and the accessories such as bends, tees, covers and brackets.

Do you show prices?

No. Each request is quoted from the specification and quantity.

Related pages